Funtime FT454CB Manuel d'utilisation et d'entretien télécharger pdf (Page 3)

Assembling Parts

C. Popcorn scoop x 1 pc D. Kernel scoop + Oil scoop set

Assemble the kettle (B) on the supporters which

are built into the main unit (A), and connect the

socket.

Assembling Procedures:

. Use bolts & washers (Package B) provided to connect the Long stand (F) and the 2 pcs

square pole (E) together.

. Connect the completed above (1) with the short stand (G) by the bolts & washers

(Package B).

wheels (J) and then fix it with round cap nuts by wrenches provided (Package D).

of the short and long stand into the bottom of (H) and then fix by bolts in (Package B).

. Turn the complete unit back to up-right position. Install the handrail (D) onto the left hand

& the working platform (C) on the right hand by bolts & nuts with washers included in

(Package A).

. Place the main unit (A) onto the topside of

the storage cabinet. (Caution: Power cord

outlet should be inserted into

the u-shape position.)

(Caution: Roller bar should be on the

door side and also check if gears between

pot and ceiling are perfectly matched).

. Connect the power plug from the

ceiling with the socket on the bottom

. Open the door of the storage cabinet

and release the spring shaft beneath the main

unit in order to fix the main unit with

the storage base.

Remark: Main unit alone could be used

and placed onto stable counter top for operation.

-3-

-4-

. Turn the storage cabinet (K) up side down for convenient assembling. Insert both ends

. Insert axle (H) into short stand. Place sleeves and washers (Package C) onto each side of

Main unit x 1 pc B. Kettle x 1 pc A.

. Hook up the Kettle (B) onto the hanger.

of the kettle.

FT422CR / FT422CB – Voltage: AC 120V ~60Hz

FT454CR/FT454CB

1 2 3 4 5

Pas de commentaire

Funtime FT454CB Manuel d'utilisation et d'entretien Page 3